• AUTO REF/KERATOMETER AUTO REF/KERATOMETER ARK-530A/ARK-510A ARK-530A/ARK-510A OPERATOR’S MANUAL OPERATOR’S MANUAL. • Original instructions NIDEK CO., LTD.: 34-14, Maehama, Hiroishi-cho, Gamagori, Aichi 443-0038, Japan (Manufacturer) Telephone: +81-5 Facsimile: +81-5 NIDEK CO., LTD.: 3F Sumitomo Fudosan Hongo Bldg., 3-22-5, Hongo, (Tokyo Office) Bunkyo-Ku, Tokyo 113-0033, Japan Telephone: +81-3-5844-2641 Facsimile: +81-3-5844-2642 NIDEK INCORPORATED: 47651 Westinghouse Drive, Fremont, California 94539, U. • Use this device properly and safely. BEFORE USE, READ THIS MANUAL. This operator’s manual contains information necessary for the operation of the NIDEK AUTO REF/KERATOMETER Model ARK-530A/ARK-510A. This manual includes the operating procedures, safety precautions, and specifications. Yesudas tamil hits songs mp3 download.

This manual is necessary for proper use. Especially, the safety precautions and operating procedures must be thoroughly understood prior to operation of the device. • Usage precautions Safety of LED • The device is a Class 1 LED product in accordance with IEC60825-1: 1993+A1: CAUTION 1997+A2: 2001 and the LED used for the device is safe in expected use conditions including situations such as looking into the LED using an optical system. Boom 2 keygen mac. However, it is recommended to observe the following precautions when using the device: 1) Do not direct LED beams to human eyes when unnecessary. • • Avoid storing the device where it is exposed to rain or water, or poisonous gas or CAUTION liquid is present. Corrosion or malfunction of the device may occur.

• Avoid installing the device where it is exposed to direct air-conditioning flow. Changes in temperature may result in condensation inside the device or adversely affect measurements. • • When the device is carried, two persons CAUTION should hold it at positions (A) and (B) (both right and left sides). Avoid lifting by the forehead rest or main body instead hold it by the bottom of the base. If only one person carries the device, or areas other than the base are used for lifting and the device falls, there is a. • During use • Before use, perform visual and operation checks. If abnormal conditions are CAUTION encountered, stop using the device.

If the device is used under abnormal conditions, intended results may not occur. Also unexpected malfunctions or health hazards may occur due to improper measurement. • • Do not operate the LCD with wet hands. CAUTION Water seeping into the device may result in failure of the device.

• There may be a few dead or constantly-lit pixels in your LCD. This does not represent failure of the LCD; This is due to the structure of the LCD. • • During installation and operation of the device, observe the following instructions CAUTION about EMC (electromagnetic compatibility): - Do not use the device simultaneously with other electronic equipment to avoid electro- magnetic interference with the operation of the device. - Do not use the device near, on, or under other electronic equipment to avoid electro- magnetic interference with the operation of the device. • { Patient environment The patient environment is the volume of space in which contact can occur between the patient and any part of the device (including connected devices) or between the patient and any other person(s) touching the device (including connected devices). Use devices that comply with IEC60601-1 in the patient environment. • After use • This device uses a heat-sensitive printer paper.